This is used only on some models and it allows you to add a remote to the already existing remotes. The programming mode is determined by the amount of times you go from key off to the key on position and back before pulling the key out.Ī. Now select the mode by inserting the key into the ignition switch and turning it to the Run or On position.
Press the Master Door Lock Switch (this would be the switch IN the car) 5 times from Lock to Unlock.Ħ. Insert the key into the ignition switch and then pull it out.ģ. The key is NOT inserted in the ignition.Ģ. The vehicle should be in the following condition:Ī. To exit programming mode, open the drivers doorġ. System should now lock and unlock vehicle Press key lock button for a minimum of 1 sec and release Yaris built in France Press key lock button for a minimum of 1 sec and release Yaris built in Japan and yaris verso: Simultaneously press and hold key lock and unlock buttons for 1-1.5 sec System should now lock and unlock vehicle, once or twice depending which mode has been selected Switch ignition ON and OFF once to program new key code whilst retaining original codes or twice to program a new key code whilst erasing the original codes Within 40 sec close and open drivers door twice Hi, I need to program a new key so I can open the car with just the remote buttons, ive read various methods on how to do it with no success the methods below are all the ones triedĭrivers door open and removed from ignition